Understanding LP2K0610BD TeSys K reversing contactor before replacement
The complete LP2K0610BD code points to a particular Schneider Electric TeSys K reversing contactor. This page separates verified product identification from site-specific selection for LP2K0610BD; similar-looking codes can be indexed together without treating them as electrically interchangeable.
Verified technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Full designation | LP2K0610BD |
| Product identification | TeSys K reversing contactor |
| Poles | 3P |
| Motor duty | AC-3 up to 440 V, 6 A |
| Coil | 24 V DC |
Site-specific question
Before approving LP2K0610BD, answer this: Check reversing interlock and 1 NO auxiliary contact. Check the exact LP2K0610BD documentation and operating conditions rather than selecting only by family name.
Three-stage review
- 01 / Identify Use the complete LP2K0610BD designation in the purchase order and on the equipment tag. Check the supplied label against LP2K0610BD before booking the item into stock.
- 02 / Compare For LP2K0610BD, compare the table above with actual duty, supply, connections and mounting. Check reversing interlock and 1 NO auxiliary contact. A shared category image must not be used as proof of exact LP2K0610BD construction.
- 03 / Accept After installing LP2K0610BD, record the inspection and functional test. Store configuration, relay setting or controller program information with the LP2K0610BD equipment record when relevant.
Evidence to retain
Keep the order confirmation, packing-label photo, manufacturer document revision, equipment location and acceptance record for LP2K0610BD. If a future order requests LP2K0610BD, these records help distinguish an exact repeat from a merely similar-looking alternative.
If LP2K0610BD is part of a control or protection system, the responsible engineer should also preserve settings, program backup, terminal schedule and test evidence. A replacement that changes behavior must be assessed before LP2K0610BD is energized.
Similar printed designations
The 3 codes below share a visible LP2K pattern with LP2K0610BD and are consolidated on this representative page. Each may differ in function, rating, connection or approval from LP2K0610BD; verify every complete code separately.
Final purchasing instruction
Quote LP2K0610BD in full, specify the required quantity and list the accessories or software records that apply to the installation. The supplier should confirm the delivered LP2K0610BD identity; the site team should confirm that LP2K0610BD meets the particular application before commissioning.
