Schneider Electric XUZC100 technical acceptance guide
The complete XUZC100 code points to a particular Schneider Electric OsiSense XU photoelectric reflector. This page separates verified product identification from site-specific selection for XUZC100; similar-looking codes can be indexed together without treating them as electrically interchangeable.
Verified technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Full designation | XUZC100 |
| Product identification | OsiSense XU photoelectric reflector |
| Accessory | Square reflector |
| Dimensions | 100 × 100 mm |
| Use | Reflex photoelectric sensing |
Three-stage review
- 01 / Identify Use the complete XUZC100 designation in the purchase order and on the equipment tag. Check the supplied label against XUZC100 before booking the item into stock.
- 02 / Compare For XUZC100, compare the table above with actual duty, supply, connections and mounting. Check sensor alignment and environment. A shared category image must not be used as proof of exact XUZC100 construction.
- 03 / Accept After installing XUZC100, record the inspection and functional test. Store configuration, relay setting or controller program information with the XUZC100 equipment record when relevant.
Site-specific question
Will XUZC100 fit the installed electrical and mechanical interface? Check sensor alignment and environment. Confirm the answer using current documentation, the physical XUZC100 label and the project drawing.
Evidence to retain
Keep the order confirmation, packing-label photo, manufacturer document revision, equipment location and acceptance record for XUZC100. If a future order requests XUZC100, these records help distinguish an exact repeat from a merely similar-looking alternative.
If XUZC100 is part of a control or protection system, the responsible engineer should also preserve settings, program backup, terminal schedule and test evidence. A replacement that changes behavior must be assessed before XUZC100 is energized.
Similar printed designations
The 3 codes below share a visible XUZC pattern with XUZC100 and are consolidated on this representative page. Each may differ in function, rating, connection or approval from XUZC100; verify every complete code separately.
Final purchasing instruction
Quote XUZC100 in full, specify the required quantity and list the accessories or software records that apply to the installation. The supplier should confirm the delivered XUZC100 identity; the site team should confirm that XUZC100 meets the particular application before commissioning.
