Schneider K1E005N Harmony K1 cam-switch body: order identity and field handover
The complete K1E005N code points to a particular Schneider Electric Harmony K1 cam-switch body. This page separates verified product identification from site-specific selection for K1E005N; similar-looking codes can be indexed together without treating them as electrically interchangeable.
Verified technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Full designation | K1E005N |
| Product identification | Harmony K1 cam-switch body |
| Poles | 1 |
| Positions | 5 steps at 45° |
| Current | 12 A; confirm utilization category |
Site-specific question
Before approving K1E005N, answer this: Check the switching program and operator mounting. Check the exact K1E005N documentation and operating conditions rather than selecting only by family name.
Three-stage review
- 01 / Identify Use the complete K1E005N designation in the purchase order and on the equipment tag. Check the supplied label against K1E005N before booking the item into stock.
- 02 / Compare For K1E005N, compare the table above with actual duty, supply, connections and mounting. Check the switching program and operator mounting. A shared category image must not be used as proof of exact K1E005N construction.
- 03 / Accept After installing K1E005N, record the inspection and functional test. Store configuration, relay setting or controller program information with the K1E005N equipment record when relevant.
Evidence to retain
Keep the order confirmation, packing-label photo, manufacturer document revision, equipment location and acceptance record for K1E005N. If a future order requests K1E005N, these records help distinguish an exact repeat from a merely similar-looking alternative.
If K1E005N is part of a control or protection system, the responsible engineer should also preserve settings, program backup, terminal schedule and test evidence. A replacement that changes behavior must be assessed before K1E005N is energized.
Similar printed designations
The 3 codes below share a visible K1E0 pattern with K1E005N and are consolidated on this representative page. Each may differ in function, rating, connection or approval from K1E005N; verify every complete code separately.
Final purchasing instruction
Quote K1E005N in full, specify the required quantity and list the accessories or software records that apply to the installation. The supplier should confirm the delivered K1E005N identity; the site team should confirm that K1E005N meets the particular application before commissioning.
