LP5K0901BW3 TeSys K reversing contactor product data and service decisions
This page records the full designation LP5K0901BW3 for procurement and maintenance. The category main image is reused as a reference illustration and may not depict the exact LP5K0901BW3 unit. Use the technical items below with the current manufacturer documentation and the actual site design.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | LP5K0901BW3 |
| Product identity | TeSys K reversing contactor |
| Poles | 3 |
| AC-3 current | 9 A up to 440 V |
| Auxiliary contact | 1 NC |
| Coil | 24 V DC |
5. Install and verify
Follow the safe-isolation and installation instructions applicable to LP5K0901BW3. Verify wiring, mounting, configuration and protective settings against the project design. Record the functional or commissioning test and the final installed LP5K0901BW3 identifier.
1. Define the installed duty
Before selecting LP5K0901BW3, identify the equipment tag, supply, load and operating conditions. The intended role is TeSys K reversing contactor. Confirm motor duty and electrical/mechanical interlocking. Record any environmental or safety requirement that will affect the final specification of LP5K0901BW3.
2. Check the technical interface
Compare LP5K0901BW3 against the host equipment, mounting dimensions, terminals and necessary accessories. Check electrical ratings and interface protocols where they apply. A similar-looking code can change a critical attribute, so the full LP5K0901BW3 designation must remain on the review sheet.
3. Request and assess a quotation
Ask the supplier to quote LP5K0901BW3 exactly, with quantity, destination and current manufacturer documents. Confirm whether the offer includes every needed accessory. If LP5K0901BW3 is unavailable, demand a written replacement proposal and review every affected parameter before approving it.
4. Receive and inspect
When LP5K0901BW3 arrives, compare the nameplate or package label to the approved order. Photograph the marking, inspect physical condition and account for supplied parts. Do not place an item marked differently from LP5K0901BW3 into service without an approved substitution record.
Why the complete code matters
The confirmed details in the table are deliberately limited to information supported by manufacturer material for LP5K0901BW3. Additional values may depend on a suffix, revision, regional approval or mating component. Before ordering or energising LP5K0901BW3, verify any unsupplied value in the current exact-product document.
Keep LP5K0901BW3 visible in the bill of materials, quotation and maintenance log. This reduces the chance that a near-looking part is selected by appearance alone. The shared image on this page does not establish the physical identity or ratings of LP5K0901BW3.
Similar-looking designations indexed here
The following 1 codes resemble the LP5K pattern of representative LP5K0901BW3. They are searchable references only. They may differ in function, ratings, connection or approvals; the list does not mean they can replace LP5K0901BW3.
Close-out record
After acceptance, retain the final LP5K0901BW3 designation, the approved data sheet, supplier details and commissioning result. If the installed part differs from LP5K0901BW3, document the engineering approval and update the maintenance record.
