Technical selection notes for LC2K0601B7 TeSys K reversing contactor
LC2K0601B7 is the complete designation for a Schneider Electric TeSys K reversing contactor. This page gives the verified identity and a practical handover checklist for LC2K0601B7; the shared category image is illustrative, not a photograph of the exact LC2K0601B7 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LC2K0601B7 |
| Product identity | TeSys K reversing contactor |
| Poles | 3P |
| AC-3 current | 6 A up to 440 V |
| Coil | 24 V AC |
Application checkpoint
Check mechanical interlock, motor duty and coil supply. Confirm the exact LC2K0601B7 nameplate, current manufacturer instructions and the project drawing before acceptance.
A similar-looking code is not evidence that it will replace LC2K0601B7. Compare electrical duty, mounting, connection and control behavior before approving LC2K0601B7 for installation.
Installation and service record
Before fitting LC2K0601B7, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where LC2K0601B7 participates in a programmable system. After installation, carry out a controlled functional test appropriate to LC2K0601B7 and record the result.
For a repeat order of LC2K0601B7, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for LC2K0601B7 without a technical review.
Related visual-code register
The following 3 unassigned designations have a similar visible LC2K pattern to LC2K0601B7, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from LC2K0601B7; verify each full code independently.
Buyer handover checklist
Specify LC2K0601B7 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for LC2K0601B7. Log any deviation from the required LC2K0601B7 configuration before dispatch and again at commissioning.
