Schneider Electric K1D002UZ4 installation-fit guide
K1D002UZ4 is the complete designation for a Schneider Electric Harmony cam changeover switch. This page gives the verified identity and a practical handover checklist for K1D002UZ4; the shared category image is illustrative, not a photograph of the exact K1D002UZ4 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | K1D002UZ4 |
| Product identity | Harmony cam changeover switch |
| Poles | 2 |
| Switching angle | 60° |
| Rated current | 12 A; confirm utilization category |
Fit decision
Compare the switching diagram and panel mounting. Confirm the exact K1D002UZ4 nameplate, current manufacturer instructions and the project drawing before acceptance.
Receiving inspection
At receipt, compare K1D002UZ4 on the package with K1D002UZ4 on the product marking. Inspect terminals, housing and supplied accessories, and photograph the rating label for the maintenance file.
Installation and service record
Before fitting K1D002UZ4, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where K1D002UZ4 participates in a programmable system. After installation, carry out a controlled functional test appropriate to K1D002UZ4 and record the result.
For a repeat order of K1D002UZ4, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for K1D002UZ4 without a technical review.
Related visual-code register
The following 4 unassigned designations have a similar visible K1D0 pattern to K1D002UZ4, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from K1D002UZ4; verify each full code independently.
Buyer handover checklist
Specify K1D002UZ4 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for K1D002UZ4. Log any deviation from the required K1D002UZ4 configuration before dispatch and again at commissioning.
