XS518B1DAL2 application record for OsiSense XS5 inductive sensor
The complete XS518B1DAL2 code points to a particular Schneider Electric OsiSense XS5 inductive sensor. This page separates verified product identification from site-specific selection for XS518B1DAL2; similar-looking codes can be indexed together without treating them as electrically interchangeable.
Verified technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Full designation | XS518B1DAL2 |
| Product identification | OsiSense XS5 inductive sensor |
| Body | M18 threaded |
| Sensing distance | 5 mm |
| Connection | 2 m cable |
Three-stage review
- 01 / Identify Use the complete XS518B1DAL2 designation in the purchase order and on the equipment tag. Check the supplied label against XS518B1DAL2 before booking the item into stock.
- 02 / Compare For XS518B1DAL2, compare the table above with actual duty, supply, connections and mounting. Check 12–48 V DC supply and output circuit. A shared category image must not be used as proof of exact XS518B1DAL2 construction.
- 03 / Accept After installing XS518B1DAL2, record the inspection and functional test. Store configuration, relay setting or controller program information with the XS518B1DAL2 equipment record when relevant.
Site-specific question
Will XS518B1DAL2 fit the installed electrical and mechanical interface? Check 12–48 V DC supply and output circuit. Confirm the answer using current documentation, the physical XS518B1DAL2 label and the project drawing.
Evidence to retain
Keep the order confirmation, packing-label photo, manufacturer document revision, equipment location and acceptance record for XS518B1DAL2. If a future order requests XS518B1DAL2, these records help distinguish an exact repeat from a merely similar-looking alternative.
If XS518B1DAL2 is part of a control or protection system, the responsible engineer should also preserve settings, program backup, terminal schedule and test evidence. A replacement that changes behavior must be assessed before XS518B1DAL2 is energized.
Similar printed designations
The 4 codes below share a visible XS51 pattern with XS518B1DAL2 and are consolidated on this representative page. Each may differ in function, rating, connection or approval from XS518B1DAL2; verify every complete code separately.
Final purchasing instruction
Quote XS518B1DAL2 in full, specify the required quantity and list the accessories or software records that apply to the installation. The supplier should confirm the delivered XS518B1DAL2 identity; the site team should confirm that XS518B1DAL2 meets the particular application before commissioning.
