Application profile for XX518A3PAM12 M18 ultrasonic sensor
The exact code XX518A3PAM12 should be retained on every service request for this M18 ultrasonic sensor. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XX518A3PAM12.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XX518A3PAM12 |
| Product identity | M18 ultrasonic sensor |
| Nominal range | 0.5 m |
| Housing | M18 cylindrical |
| Output | Digital, normally open |
| Connection | M12 connector |
What to record after installation
Before removal, capture the original XX518A3PAM12 terminals, wiring, settings and mounting position. After installation of XX518A3PAM12, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XX518A3PAM12, first identify the machine, panel or signalling assembly and the duty performed by this M18 ultrasonic sensor. Record nearby accessories and the installed orientation. Check target distance, mounting and controller input. The model code XX518A3PAM12 should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for XX518A3PAM12 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XX518A3PAM12 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
Procurement interpretation
Quote XX518A3PAM12 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XX518A3PAM12; the purchasing decision should use the complete written reference and the final application review.
If XX518A3PAM12 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XX518A3PAM12 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XX518 visual pattern is grouped here. Any alternative to XX518A3PAM12 still needs its own technical check.
Order conclusion
Specify XX518A3PAM12 as printed, confirm the installed application and request supporting manufacturer documentation. For XX518A3PAM12, the final site engineer must approve any proposed deviation before the equipment is returned to service.
