XUYFNEP40050 XUY fork photoelectric sensor operating context and technical record
The exact code XUYFNEP40050 should be retained on every service request for this XUY fork photoelectric sensor. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XUYFNEP40050.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XUYFNEP40050 |
| Product identity | XUY fork photoelectric sensor |
| Fork width | 50 mm |
| Fork depth | 42 mm |
| Supply | 12 to 24 V DC |
| Connection | M8 connector |
| Output | Programmable PNP/NPN |
What changes the selection
A replacement for XUYFNEP40050 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XUYFNEP40050 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
What to record after installation
Before removal, capture the original XUYFNEP40050 terminals, wiring, settings and mounting position. After installation of XUYFNEP40050, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XUYFNEP40050, first identify the machine, panel or signalling assembly and the duty performed by this XUY fork photoelectric sensor. Record nearby accessories and the installed orientation. Check label or object path through the fork. The model code XUYFNEP40050 should be compared with the physical nameplate, not reconstructed from a photograph.
Procurement interpretation
Quote XUYFNEP40050 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XUYFNEP40050; the purchasing decision should use the complete written reference and the final application review.
If XUYFNEP40050 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XUYFNEP40050 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XUYF visual pattern is grouped here. Any alternative to XUYFNEP40050 still needs its own technical check.
Order conclusion
Specify XUYFNEP40050 as printed, confirm the installed application and request supporting manufacturer documentation. For XUYFNEP40050, the final site engineer must approve any proposed deviation before the equipment is returned to service.
