Identify XUSL2E3BB081N before selecting a replacement
The exact code XUSL2E3BB081N should be retained on every service request for this XUSL type-2 safety light curtain. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XUSL2E3BB081N.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XUSL2E3BB081N |
| Product identity | XUSL type-2 safety light curtain |
| Application | Body protection |
| Beams | Three |
| Protected height | 810 mm |
| Outputs | Two PNP OSSD safety outputs |
What to record after installation
Before removal, capture the original XUSL2E3BB081N terminals, wiring, settings and mounting position. After installation of XUSL2E3BB081N, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XUSL2E3BB081N, first identify the machine, panel or signalling assembly and the duty performed by this XUSL type-2 safety light curtain. Record nearby accessories and the installed orientation. A competent safety engineer must validate the entire protective function and stop time. The model code XUSL2E3BB081N should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for XUSL2E3BB081N must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XUSL2E3BB081N and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
Procurement interpretation
Quote XUSL2E3BB081N in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XUSL2E3BB081N; the purchasing decision should use the complete written reference and the final application review.
If XUSL2E3BB081N belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XUSL2E3BB081N to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XUSL2 visual pattern is grouped here. Any alternative to XUSL2E3BB081N still needs its own technical check.
Order conclusion
Specify XUSL2E3BB081N as printed, confirm the installed application and request supporting manufacturer documentation. For XUSL2E3BB081N, the final site engineer must approve any proposed deviation before the equipment is returned to service.
Additional visually similar model designations
These printed codes resemble XUSL2E3BB081N and are collected here for search only. A different code can specify a different function, rating or accessory. This is not a technical equivalence or interchangeability statement. Verify every full designation before ordering.
- XUSL4E30H061L
