Schneider ZCY16 OsiSense XC steel roller lever: application and replacement notes
The exact code ZCY16 should be retained on every service request for this OsiSense XC steel roller lever. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered ZCY16.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | ZCY16 |
| Product identity | OsiSense XC steel roller lever |
| Component | Steel roller lever |
| Host | Compatible ZCE rotary operating head |
| Track | 24/31 mm for ZCMD or 29/36 mm for ZCD/P/T, per manufacturer catalogue |
What changes the selection
A replacement for ZCY16 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for ZCY16 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
What to record after installation
Before removal, capture the original ZCY16 terminals, wiring, settings and mounting position. After installation of ZCY16, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For ZCY16, first identify the machine, panel or signalling assembly and the duty performed by this OsiSense XC steel roller lever. Record nearby accessories and the installed orientation. Check the head, travel direction and selected track position. The model code ZCY16 should be compared with the physical nameplate, not reconstructed from a photograph.
Procurement interpretation
Quote ZCY16 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for ZCY16; the purchasing decision should use the complete written reference and the final application review.
If ZCY16 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from ZCY16 to a different part without checking both product documents.
Visually similar catalogue codes
The 3 codes below resemble the ZCY visual pattern and are indexed with representative ZCY16 for search. They can differ in function, electrical limits or approvals; none should be considered automatically interchangeable with ZCY16.
Order conclusion
Specify ZCY16 as printed, confirm the installed application and request supporting manufacturer documentation. For ZCY16, the final site engineer must approve any proposed deviation before the equipment is returned to service.
