XUM2APCNL2 XUM through-beam photoelectric sensor operating context and technical record
The exact code XUM2APCNL2 should be retained on every service request for this XUM through-beam photoelectric sensor. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XUM2APCNL2.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XUM2APCNL2 |
| Product identity | XUM through-beam photoelectric sensor |
| Detection | Through beam |
| Nominal distance | 15 m |
| Supply | 12 to 24 V DC |
| Output | PNP, programmable NO or NC |
| Cable | 2 m |
Where the item is used
For XUM2APCNL2, first identify the machine, panel or signalling assembly and the duty performed by this XUM through-beam photoelectric sensor. Record nearby accessories and the installed orientation. Check emitter pairing, beam alignment and controller input. The model code XUM2APCNL2 should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for XUM2APCNL2 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XUM2APCNL2 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
What to record after installation
Before removal, capture the original XUM2APCNL2 terminals, wiring, settings and mounting position. After installation of XUM2APCNL2, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Procurement interpretation
Quote XUM2APCNL2 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XUM2APCNL2; the purchasing decision should use the complete written reference and the final application review.
If XUM2APCNL2 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XUM2APCNL2 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XUM2 visual pattern is grouped here. Any alternative to XUM2APCNL2 still needs its own technical check.
Order conclusion
Specify XUM2APCNL2 as printed, confirm the installed application and request supporting manufacturer documentation. For XUM2APCNL2, the final site engineer must approve any proposed deviation before the equipment is returned to service.
Additional similar-looking designations
XUM sensor designations are indexed here for search and enquiry. They may designate different hardware, functions or configurations and are not automatically interchangeable. Check each exact reference, rating and manufacturer record.
