XUB0APSNM12 multimode sensor: teach mode, target distance and wiring selection
Schneider Electric XUB0APSNM12 is a cylindrical photoelectric sensor that can be taught for several detection arrangements. The sensing distance is not one fixed number across diffuse, reflector and emitter/receiver configurations. The shared controls collage is illustrative; confirm the exact XUB0APSNM12 label and optical setup.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | XUB0APSNM12 |
| Range | OsiSense XU photoelectric sensor |
| Housing | Cylindrical M18, plastic |
| Supply | 12–24 V DC |
| Output | 3-wire PNP, programmable NO/NC |
| Connector | M12 male, 4 pins |
| Detection | Multimode; effective distance depends on selected mode and accessories |
Choose the optical mode
The XUB0APSNM12 sensor can be configured as diffuse, diffuse with background suppression, polarized reflex with a suitable reflector, or through-beam with the required separate emitter. The usable distance and target behavior change with that choice. Capture the existing teach setting before replacement.
Electrical interface
Confirm the 12–24 V DC supply, M12 pin assignment and PNP input compatibility for XUB0APSNM12. Its NO/NC function is programmable, so a replacement can be physically correct but logically inverted. Check the PLC input state in both target-present and target-absent conditions.
Mounting and validation
Inspect the M18 mounting, alignment, lens cleanliness, background and target material. Test XUB0APSNM12 over a complete machine cycle, including worst-case speed and ambient light. Do not treat a related XUB housing as interchangeable without comparing output polarity and teach behavior.
Similar-looking Schneider references
The following codes resemble XUB0APSNM12 in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for XUB0APSNM12.
XUB0BPSNM12, XUBTAPSNM12, XUB4APANM12, XUB4APBNM12, XUB6APXNM12, XUB9APBNM12, XUB0BKSNM12T, XUB1BPANM12, XUB4APANL2, XUB5BPANL2
Before placing an order
Quote XUB0APSNM12 with the selected sensing mode, target distance, reflector or emitter requirement and M12 cable details. Match the application settings as well as the ordering code for XUB0APSNM12.
For XUB0APSNM12, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
