HMIGTO5310 operator terminal: display size, application backup and panel-cutout checks
Schneider Electric HMIGTO5310 is a 10.4-inch GTO touchscreen used as a machine operator interface. Selecting a spare requires more than matching screen size: the panel cutout, application project and connected controller protocols all matter. The common PLC/HMI collage is a family reference image, not a photograph of the exact HMIGTO5310 unit.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | HMIGTO5310 |
| Range | Harmony / Magelis GTO advanced operator panel |
| Display | 10.4-inch TFT touchscreen |
| Resolution | 640 × 480 pixels, VGA |
| Color depth | 65K colors |
| Memory | 96 MB as stated in the product description |
Recover the application
Before replacing HMIGTO5310, secure the HMI application, communications settings, passwords and any recipes or alarms stored on the panel. Check the original engineering software version and available transfer media. A new screen without the approved project will not restore the operating interface.
Mechanical and electrical fit
Measure the cutout and confirm mounting clips, supply, cable access and environmental sealing. Compare the HMIGTO5310 connector set to the existing PLC and network wiring. An earlier Magelis panel can need an adapter even when the nominal display size is similar.
Commission the operator view
After loading the verified project onto HMIGTO5310, inspect graphics, touch targets, alarm acknowledgment and controller communication. Test safety-related displays as information only; maintain the actual safety logic in the designated control system. Record the final project revision and network details.
Similar-looking Schneider references
The following codes resemble HMIGTO5310 in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for HMIGTO5310.
HMIGTO2310, HMIGTO3510, HMIGTO4310, HMIGTO6310
Before placing an order
Request HMIGTO5310 using the full panel label and provide the current project backup, cutout dimensions and controller protocol. Confirm lifecycle and substitution arrangements for HMIGTO5310 before ordering.
For HMIGTO5310, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
Additional Schneider HMI visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- HMIPWC5D0E01
- HMIYSSDS080S1
- HMIZGBAT
- HMIZSD4G
