RXM2AB2BD relay selection: socket, two changeover contacts and 24 V DC control
Schneider Electric RXM2AB2BD is a plug-in control relay with two changeover contacts and a 24 V DC coil. A relay's socket, coil code and contact arrangement must all match the control panel. The shared controls image is a category illustration, not an exact photograph of RXM2AB2BD.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | RXM2AB2BD |
| Range | Harmony electromechanical miniature relay |
| Contacts | 2 changeover (2 CO) |
| Rated contact current | 12 A under stated rating conditions |
| Coil | 24 V DC |
| Indication | LED with mechanical/test features |
Check the coil and socket
Read the existing coil label and socket terminal diagram before ordering RXM2AB2BD. A related RXM2A relay may use a different coil voltage or test-button arrangement. Confirm control-output capacity and any surge-suppression requirement for the 24 V DC circuit.
Contact-duty review
The 12 A figure for RXM2AB2BD applies to stated conditions; inductive loads, switching frequency and voltage can change the permitted contact duty. Trace both changeover circuits on the panel schematic, then compare the contact assignment to the installed socket.
Service test
After fitting RXM2AB2BD, verify the LED, mechanical indication and actual output behavior through the required sequence. A visible test button is not a substitute for an approved functional test. Record any socket damage, burnt contacts or loose wiring found during maintenance.
Similar-looking Schneider references
The following codes resemble RXM2AB2BD in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for RXM2AB2BD.
RXM2AB1BD, RXM2AB2JD, RXM2AB3BD, RXM2AB1B7, RXM2AB2F7, RXM2AB2P7, RXM2AB2B7PVM, RXM2AB1P7
Before placing an order
Specify RXM2AB2BD with the 24 V DC coil, 2 CO contact arrangement and matching socket. Ask for a documented comparison before replacing RXM2AB2BD with another RXM suffix.
For RXM2AB2BD, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
Additional Schneider RXM2 visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- RXM24VDC
- RXM2AB2BD + RXZE2M114 + RXZ400 + RXM040W
- RXM2AB2BD+RXZE1M2C
- RXM2LB RXZE1M2C
- RXM2LB2BD
- RXM2LB2JD
- RXM2LB2P7
- RXM2LB3BD
Additional Schneider RXM visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- RXM-041FU7
- RXM3AB2B7
- RXM3AB2BD
- RXM3AB2P7
