ATS01N106FT soft-start selection for small asynchronous motors and compact panels
Schneider Electric ATS01N106FT is a compact Altistart 01 soft starter for small asynchronous motors. It moderates the start rather than providing continuous variable-speed control. The power range depends on supply voltage and motor current, so both must be checked before selection. The shared drive collage is illustrative, not an exact ATS01N106FT photograph.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | ATS01N106FT |
| Range | Altistart 01 |
| Rated current | 6 A |
| Supply class | 110–480 V under stated application conditions |
| Motor power | 0.75–3 kW range depending on supply voltage |
| Application | Asynchronous-motor soft starting |
| Format | Compact DIN-rail/panel installation per product guide |
Motor sizing
Compare the motor nameplate current, supply voltage and start duty with the 6 A ATS01N106FT rating. The quoted 0.75–3 kW span changes with voltage and is not a universal fit for every motor in that range. Check starts per hour, load inertia and ambient conditions against current Schneider data.
Control and wiring
Map the ATS01N106FT start command, upstream short-circuit protection, bypass or output arrangement and terminal positions before replacement. A compact ATS01 with another suffix can look almost identical while its current and supply class differ. Record the existing dial settings and wiring before removal.
Startup test
Commission ATS01N106FT with a monitored motor start, checking ramp behavior, current and load response. Verify stop behavior and protective coordination under the site's approved procedure. If availability differs by market, confirm an exact-code supply or an engineered alternative rather than treating any ATS01N unit as equivalent.
Similar-looking Schneider references
The following codes resemble ATS01N106FT in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for ATS01N106FT.
ATS01N112FT, ATS01N209QN, ATS01N212QN, ATS01N222QN, ATS01N232QN
Before placing an order
Request ATS01N106FT with motor nameplate, supply voltage and operating duty. A replacement for ATS01N106FT needs the current and wiring checked, not just a visual match.
For ATS01N106FT, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
Additional visually similar model designations
These printed codes resemble ATS01N106FT and are collected here for search only. A different code can specify a different function, rating or accessory. This is not a technical equivalence or interchangeability statement. Verify every full designation before ordering.
- ATS01B222QN
