ABL8REM24030 Phaseo supply replacement: 24 V output, load budget and lifecycle check
Schneider Electric ABL8REM24030 is a 24 V DC, 3 A regulated power supply for control circuits. Its output must cover the combined normal and startup demand of connected loads. Schneider has listed this reference as discontinued in some markets, so sourcing and substitute approval need explicit review. The shared image is a power-category reference, not an exact ABL8REM24030 photograph.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | ABL8REM24030 |
| Product type | Regulated switch-mode power supply |
| Input | 100–240 V AC, one- or two-phase arrangement as specified |
| Output | 24 V DC, 3 A |
| Mounting | Panel/DIN-rail installation per product guide |
| Lifecycle | Check local availability and Schneider's current recommended successor |
Calculate the load
List the PLC, sensors, relays and other 24 V consumers fed by ABL8REM24030. Sum continuous demand and check inrush or transient requirements with margin. A replacement with a nearby current rating is not automatically suitable if the panel has expanded since the original design.
Input and cabinet installation
Confirm the incoming AC supply, protective earth, terminal arrangement, panel ventilation and output distribution. Inspect fusing and voltage-drop at the farthest load. The ABL8REM24030 form factor and mounting clearance should be checked before choosing any newer power supply.
Replacement control
Record output voltage under load and the reason for failure before replacing ABL8REM24030. If Schneider proposes a successor, compare output current, ripple, mounting, terminal position and approvals. Commission the complete 24 V circuit after change rather than assuming a matching nominal voltage is enough.
Similar-looking Schneider references
The following codes resemble ABL8REM24030 in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for ABL8REM24030.
ABL8REM24050
Before placing an order
Quote ABL8REM24030 with supply details, load current and cabinet dimensions. Confirm whether original ABL8REM24030 stock or an approved successor is required for the project.
For ABL8REM24030, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
Additional visually similar model designations
These printed codes resemble ABL8REM24030 and are collected here for search only. A different code can specify a different function, rating or accessory. This is not a technical equivalence or interchangeability statement. Verify every full designation before ordering.
- ABR8REM24030
