Danfoss 084H4060 AKS 41-10 level instrument for refrigeration service
Danfoss 084H4060 identifies a AKS 41-10 liquid-level transmitter. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 084H4060 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 084H4060 |
| Manufacturer / item class | Danfoss AKS 41-10 liquid-level transmitter |
| Manufacturer family | AKS 41-10 liquid-level transmitter |
| Probe length | 1000 mm in manufacturer code table |
| Signal | 4–20 mA in manufacturer code table |
| Selection boundary | Check vessel connection and current manufacturer documentation |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Probe geometry
For Danfoss 084H4060, compare insertion length, vessel geometry and mounting arrangement before specifying the 1000 mm version.
Signal scaling
For Danfoss 084H4060, verify the receiver's 4–20 mA scaling and alarm thresholds against the existing instrumentation record.
Service verification
For Danfoss 084H4060, use approved plant isolation procedures, then confirm the live level indication against the intended reference.
Similar-looking Danfoss order references
These order strings resemble Danfoss 084H4060 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 084H4060; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 084H4060 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 084H4060 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 084H4060 identity.
