low voltage

Hotline

Danfoss 084N0005 AKS 11 Temperature Sensor | Pt1000 Element, 5.5 m Cable and Range Check

description:Danfoss 084N0005 AKS 11 Pt1000 temperature sensor: verified technical data, selection checks and similar-looking order references....
BASIC INFO

Danfoss 084N0005 AKS 11 cable sensor for refrigeration temperature measurement

Danfoss 084N0005 identifies a AKS 11 Pt1000 temperature sensor. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 084N0005 item.

Key technical data

Technical itemVerified value / selection note
Complete order number084N0005
Manufacturer / item classDanfoss AKS 11 Pt1000 temperature sensor
ElementPt1000
Measuring range-40 to +100 °C
Cable5.5 m PVC, two-wire connection
Product formCable temperature sensor
Image scopeShared Danfoss category collage, not exact-item photograph
Final selection ruleVerify complete printed code, interface and application before substitution

Controller input

For Danfoss 084N0005, confirm that the receiving input is configured for Pt1000, not another resistance sensor curve.

Cable installation

For Danfoss 084N0005, route the supplied 5.5 m cable away from damage and interference; confirm probe placement and thermal contact.

Reading acceptance

For Danfoss 084N0005, compare controller indication with a reference temperature at an appropriate operating point.

Similar-looking Danfoss order references

These order strings resemble Danfoss 084N0005 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 084N0005; verify each complete code independently.

084N0028
084N1012
084N1161
084N2003

Ordering and receiving review

Request a quotation against the full Danfoss 084N0005 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.

When Danfoss 084N0005 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 084N0005 identity.

 

 

Pre:Danfoss 084H4060 AKS 41-10 Liquid Level Transmitter | 1000 mm Probe and 4–20 mA Signal Review Next:Danfoss 027L3363 ICF 20 Valve Station | Six Modules, DN25 Butt-Weld and Refrigeration Configuration Review