Danfoss 082H0161 AME 435 actuator for modulating HVAC valve control
Danfoss 082H0161 identifies a AME 435 modulating electrical actuator. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 082H0161 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 082H0161 |
| Manufacturer / item class | Danfoss AME 435 modulating electrical actuator |
| Supply | 24 V AC/DC |
| Closing force | 400 N |
| Stroke | 20 mm |
| Input / protection | 0(2)–10 V or 0(4)–20 mA / IP54 |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Valve pairing
For Danfoss 082H0161, check the fitted valve series, stem coupling and 20 mm travel requirement before ordering the actuator.
Control input
For Danfoss 082H0161, identify voltage or current control, feedback and drive direction from the controller wiring.
Travel acceptance
For Danfoss 082H0161, command the actuator across its full range and check valve end positions and response under load.
Similar-looking Danfoss order references
These order strings resemble Danfoss 082H0161 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 082H0161; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 082H0161 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 082H0161 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 082H0161 identity.
