Hirschmann EES20-0600UHIHSH2E Product Details, Exact Identity and Project Selection Checklist
Confirm the full ordering identity
Hirschmann EES20-0600UHIHSH2E identifies the Hirschmann embedded managed Fast Ethernet switch module, model EES20-0600UHIHSH2E, part number 942050001. Keep the complete model and part number together in the RFQ because nearby family members may differ in interfaces, optical medium, environmental range, software, housing or supply arrangement.
Verified product data
| Brand | Hirschmann |
| Exact model | EES20-0600UHIHSH2E |
| Part number | 942050001 |
| Product function | Managed Fast Ethernet Switch according to IEEE 802.3, store-and-forward-switching |
| Ports / interfaces | 6 x Fast Ethernet ports, configurable as 100BaseTX or 100BaseFX, RX+/RX-and TX+/TX- signals per port |
| Operating voltage | 3.3 V DC +/- 5% |
| Power reference | 2.9 |
| Operating temperature | -40 to +85 °C °C |
| Dimensions | 88 mm x 13 mm x 60 mm |
Treat this as an embedded design component
The source describes 6 x Fast Ethernet ports, configurable as 100BaseTX or 100BaseFX, RX+/RX-and TX+/TX- signals per port. This is board-level hardware rather than a finished DIN-rail switch, so the host equipment design must provide the electrical interfaces, mechanics, cooling and protection needed by the final product. Confirm connector and signal assignments from current engineering documents before laying out a carrier board.
Check electrical and thermal integration
The documented supply is 3.3 V DC +/- 5%; the listed operating reference is -40 to +85 °C °C, with module dimensions of 88 mm x 13 mm x 60 mm. Validate tolerances, startup demand, heat dissipation and airflow inside the host assembly. A module temperature rating does not automatically qualify the complete enclosure or surrounding components for the same environment.
Control revision and approval data
Record the exact part number, hardware revision, firmware or management requirements and applicable approvals in the design file. For replacement work, compare the installed label and connector implementation with the proposed item. A family-level description cannot prove drop-in compatibility with an existing carrier or custom backplane.
Reference photograph: shared Hirschmann product image. The photographed unit may be a different model or product type; this image does not establish the configuration or availability of Hirschmann EES20-0600UHIHSH2E.
Prepare a design-stage quotation
For Hirschmann EES20-0600UHIHSH2E, provide HKXY with quantity, prototype or production schedule, destination and required documentation. State whether the request is for new equipment design, production continuity or service replacement. Include photographs and existing drawings when compatibility with a deployed assembly must be checked.
Replacement decision note
Port count or appearance alone does not establish replacement compatibility. Compare exact identity, interfaces, supply, mechanics, environmental limits and approvals together. Where an installed unit is involved, capture its settings and wiring before removal and document the reason for replacement.
Technical reference: manufacturer source for EES20-0600UHIHSH2E. Verify current documentation and the delivered revision before final engineering approval.
