Identify XVSM1 before selecting a replacement
The exact code XVSM1 should be retained on every service request for this single-tone industrial siren. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XVSM1.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XVSM1 |
| Product identity | single-tone industrial siren |
| Sound | One tone |
| Output level | 106 dB listing |
| Supply | 230 V AC |
| Status | Check regional lifecycle and replacement availability |
What changes the selection
A replacement for XVSM1 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XVSM1 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
What to record after installation
Before removal, capture the original XVSM1 terminals, wiring, settings and mounting position. After installation of XVSM1, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XVSM1, first identify the machine, panel or signalling assembly and the duty performed by this single-tone industrial siren. Record nearby accessories and the installed orientation. Check supply, sound coverage and permitted installation location. The model code XVSM1 should be compared with the physical nameplate, not reconstructed from a photograph.
Procurement interpretation
Quote XVSM1 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XVSM1; the purchasing decision should use the complete written reference and the final application review.
If XVSM1 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XVSM1 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XVSM visual pattern is grouped here. Any alternative to XVSM1 still needs its own technical check.
Order conclusion
Specify XVSM1 as printed, confirm the installed application and request supporting manufacturer documentation. For XVSM1, the final site engineer must approve any proposed deviation before the equipment is returned to service.
