Schneider XT230A1PCM12 M30 capacitive proximity sensor: application and replacement notes
The exact code XT230A1PCM12 should be retained on every service request for this M30 capacitive proximity sensor. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XT230A1PCM12.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XT230A1PCM12 |
| Product identity | M30 capacitive proximity sensor |
| Sensor type | Capacitive |
| Nominal sensing distance | 15 mm |
| Supply | 12 to 24 V DC |
| Outputs | PNP, one NC and one NO |
| Connector | M12 |
What to record after installation
Before removal, capture the original XT230A1PCM12 terminals, wiring, settings and mounting position. After installation of XT230A1PCM12, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XT230A1PCM12, first identify the machine, panel or signalling assembly and the duty performed by this M30 capacitive proximity sensor. Record nearby accessories and the installed orientation. Check target material and non-flush mounting clearance. The model code XT230A1PCM12 should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for XT230A1PCM12 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XT230A1PCM12 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
Procurement interpretation
Quote XT230A1PCM12 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XT230A1PCM12; the purchasing decision should use the complete written reference and the final application review.
If XT230A1PCM12 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XT230A1PCM12 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the XT230 visual pattern is grouped here. Any alternative to XT230A1PCM12 still needs its own technical check.
Order conclusion
Specify XT230A1PCM12 as printed, confirm the installed application and request supporting manufacturer documentation. For XT230A1PCM12, the final site engineer must approve any proposed deviation before the equipment is returned to service.
