Schneider Electric XS612B1NAM12 installation-fit guide
XS612B1NAM12 is the complete designation for a Schneider Electric OsiSense inductive proximity sensor. This page gives the verified identity and a practical handover checklist for XS612B1NAM12; the shared category image is illustrative, not a photograph of the exact XS612B1NAM12 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | XS612B1NAM12 |
| Product identity | OsiSense inductive proximity sensor |
| Body | M12 threaded |
| Sensing distance | 4 mm |
| Output | NPN normally open |
Fit decision
Check target material, sensing gap and M12 pin assignment. Confirm the exact XS612B1NAM12 nameplate, current manufacturer instructions and the project drawing before acceptance.
Receiving inspection
At receipt, compare XS612B1NAM12 on the package with XS612B1NAM12 on the product marking. Inspect terminals, housing and supplied accessories, and photograph the rating label for the maintenance file.
Installation and service record
Before fitting XS612B1NAM12, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where XS612B1NAM12 participates in a programmable system. After installation, carry out a controlled functional test appropriate to XS612B1NAM12 and record the result.
For a repeat order of XS612B1NAM12, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for XS612B1NAM12 without a technical review.
Related visual-code register
The following 9 unassigned designations have a similar visible XS61 pattern to XS612B1NAM12, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from XS612B1NAM12; verify each full code independently.
Buyer handover checklist
Specify XS612B1NAM12 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for XS612B1NAM12. Log any deviation from the required XS612B1NAM12 configuration before dispatch and again at commissioning.
