Identifying XS508B1PAL2 inductive proximity sensor before a purchase order
Use the exact XS508B1PAL2 marking when enquiring about this inductive proximity sensor. The category picture is a shared reference image, not a photograph proving the precise XS508B1PAL2 configuration. The decision points below separate confirmed data from checks that remain site-specific.
Technical data to verify first
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | XS508B1PAL2 |
| Product identification | inductive proximity sensor |
| Body | M8 threaded |
| Sensing distance | 1.5 mm nominal |
| Output | PNP normally open |
| Connection | Pre-cabled, 2 m |
Site decision
Check target material, mounting clearance and PLC input wiring. Treat a visually close code as a separate configuration until the manufacturer documentation confirms it.
Receiving inspection
For XS508B1PAL2, retain the carton label and product-nameplate photo. Compare the ordered XS508B1PAL2 with the delivered code, included accessories, and the asset record before accepting it for installation.
Installation and handover
The responsible engineer should isolate the equipment and follow the current instructions for XS508B1PAL2. Record settings, wiring, dimensions, software revision, battery state, calibration or protection-test results as relevant to inductive proximity sensor. A commissioning note should explicitly identify the installed XS508B1PAL2.
Store the XS508B1PAL2 data sheet revision, site test report and accessory list with the asset file. This is especially important if a later repair request cites only XS508B1PAL2 without the complete fitted assembly details.
Similar-looking catalogue codes
The 2 references below resemble the XS50 pattern and are indexed on this representative XS508B1PAL2 page rather than receiving separate pages. This is a visual search grouping only: their ratings, functions and compatibility may differ from XS508B1PAL2.
Procurement handoff
Place XS508B1PAL2 in the request title and repeat XS508B1PAL2 in the line-item description. Ask the supplier to confirm the exact reference, quantity, documentation and delivery condition. The purchasing record for XS508B1PAL2 should preserve any approved deviations in writing.
