Schneider Electric XS230SAMAL2 fit and function notes
Specify XS230SAMAL2 exactly when sourcing this M30 inductive proximity sensor. The shared main image is a category reference illustration, not a photograph confirming the precise XS230SAMAL2 configuration. Compare the printed reference and manufacturer data with the installed assembly.
Technical identification table
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | XS230SAMAL2 |
| Identified product | M30 inductive proximity sensor |
| Diameter | M30 |
| Nominal sensing distance | 22 mm |
| Supply | 24 to 240 V AC/DC |
| Output | 2-wire, 1 NO |
| Cable | 2 m |
Purchasing details
Write XS230SAMAL2 in full on the quote request. Ask the supplier to confirm the manufacturer reference, quantity, current documentation, included parts and destination-specific approvals. If a substitute is offered for XS230SAMAL2, compare its technical data and obtain documented approval before purchasing.
Installation evidence
On receipt, match the label on XS230SAMAL2 to the purchase order and inspect the terminals, enclosure and accessories. After installing XS230SAMAL2 under the applicable safety procedure, record a functional test and the asset location. Retain the nameplate photograph for the next service request.
Assembly boundary
The correct use of XS230SAMAL2 depends on its host equipment, connection and installation duty. Before replacing XS230SAMAL2, record the existing panel or machine position, adjacent components and any wiring or software settings. Check non-flush mounting and target material. A visually similar item may be unsuitable even if it appears to mount in the same space.
Compatibility review
For XS230SAMAL2, verify the electrical and mechanical interfaces that apply to this M30 inductive proximity sensor. This may mean pole and contact logic, sensing distance, mounting head, communication protocol, motor starter base or panelboard type. Do not infer an absent rating from a family description of XS230SAMAL2.
If the installed code XS230SAMAL2 has a revision or regional suffix on the nameplate, use that complete designation for the final order. The data above identify XS230SAMAL2 for initial screening; the current product sheet and site design remain the final reference.
Visually similar references
No additional unassigned XS230-pattern code is grouped here. If another item is proposed instead of XS230SAMAL2, request its exact reference and data sheet.
Service record to retain
Record the verified XS230SAMAL2 designation, supplier document version, acceptance test and any engineering-approved variation. The next buyer should specify XS230SAMAL2 and the actual host assembly together, rather than selecting by the shared picture alone.
