XS118B3PAL2 field checks for procurement and maintenance
XS118B3PAL2 is the complete Schneider Electric reference used here for OsiSense XS inductive proximity sensor. The shared 330 × 330 category main image is a reference collage, not an exact photograph of every XS118B3PAL2 option. Read the verified XS118B3PAL2 data before using the code in a bill of materials.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | XS118B3PAL2 |
| Verified identity | OsiSense XS inductive proximity sensor |
| Housing | M18 threaded |
| Output | PNP normally open |
| Connection | Pre-cabled, 2 m |
Procurement interpretation
Specify XS118B3PAL2 in full, including the relevant auxiliary parts, configuration and destination equipment tag. Confirm regional availability of XS118B3PAL2 before committing to a replacement project.
Installation-to-handover sequence
Before ordering: Record the full XS118B3PAL2 designation, duty, supply and connector requirements.
On receipt: Compare the delivered XS118B3PAL2 nameplate with the order and inspect its terminals and accessories.
Before energising: Confirm isolation, wiring, settings and the approved XS118B3PAL2 application drawing.
At handover: Keep the XS118B3PAL2 functional-test result and configuration record with the equipment file.
Critical fit decision
For XS118B3PAL2: Verify sensing distance, target metal and cable routing.
Site interface and commissioning
Before installing XS118B3PAL2, compare supply and signal levels, mounting space, environmental conditions and mating components with the approved design. Preserve any existing parameter file or wiring map so that the XS118B3PAL2 installation can be checked against a baseline.
After fitting XS118B3PAL2, test the actual device function in its intended circuit and record any changed setting. A visually similar designation is not evidence of drop-in compatibility with XS118B3PAL2; the approved drawing and manufacturer instructions control the decision.
Visible-code family index
The following 4 designations resemble the visible XS118 pattern of XS118B3PAL2. They are listed under this representative page rather than receiving separate pages. Differences in contacts, range, supply, construction or approvals must still be checked for each designation.
Acceptance record
Retain the ordered XS118B3PAL2 code, the delivered label, the selected settings, and a short site-test note. This makes future repeat orders of XS118B3PAL2 traceable and helps maintenance staff separate XS118B3PAL2 from close-looking variants.
Additional Schneider XS1 visually similar model codes
These ordering strings are grouped because their printed model codes look similar. They may represent different product types, functions, ratings, accessories or approvals. This list is not an interchangeability claim; verify the exact manufacturer data before ordering.
- XS106B3PAL2
- XS108B3PBL2
- XS112BLPAM12
