What the LXM05AD10M2 code means for engineering selection
LXM05AD10M2 is the complete Schneider Electric reference used here for Lexium 05A servo drive. The shared 330 × 330 category main image is a reference collage, not an exact photograph of every LXM05AD10M2 option. Read the verified LXM05AD10M2 data before using the code in a bill of materials.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LXM05AD10M2 |
| Verified identity | Lexium 05A servo drive |
| Power | 0.75 kW |
| Supply | Single-phase 200–240 V AC |
| Filter | EMC filter |
Critical fit decision
The practical decision for LXM05AD10M2 is: Preserve motion settings and assess the discontinued drive lifecycle. Do not approve LXM05AD10M2 from a code prefix alone.
Installation-to-handover sequence
Before ordering: Record the full LXM05AD10M2 designation, duty, supply and connector requirements.
On receipt: Compare the delivered LXM05AD10M2 nameplate with the order and inspect its terminals and accessories.
Before energising: Confirm isolation, wiring, settings and the approved LXM05AD10M2 application drawing.
At handover: Keep the LXM05AD10M2 functional-test result and configuration record with the equipment file.
Site interface and commissioning
Before installing LXM05AD10M2, compare supply and signal levels, mounting space, environmental conditions and mating components with the approved design. Preserve any existing parameter file or wiring map so that the LXM05AD10M2 installation can be checked against a baseline.
After fitting LXM05AD10M2, test the actual device function in its intended circuit and record any changed setting. A visually similar designation is not evidence of drop-in compatibility with LXM05AD10M2; the approved drawing and manufacturer instructions control the decision.
Visible-code family index
The following 1 designations resemble the visible LXM05 pattern of LXM05AD10M2. They are listed under this representative page rather than receiving separate pages. Differences in contacts, range, supply, construction or approvals must still be checked for each designation.
Acceptance record
Retain the ordered LXM05AD10M2 code, the delivered label, the selected settings, and a short site-test note. This makes future repeat orders of LXM05AD10M2 traceable and helps maintenance staff separate LXM05AD10M2 from close-looking variants.
