Identify XCRA11 before selecting a replacement
The exact code XCRA11 should be retained on every service request for this XC Special heavy-duty limit switch. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered XCRA11.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | XCRA11 |
| Product identity | XC Special heavy-duty limit switch |
| Application | Hoisting and severe material handling |
| Operator | Spring-return rod lever |
| Housing | Metal |
| Contacts | Confirm complete contact diagram from installed device |
What to record after installation
Before removal, capture the original XCRA11 terminals, wiring, settings and mounting position. After installation of XCRA11, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Where the item is used
For XCRA11, first identify the machine, panel or signalling assembly and the duty performed by this XC Special heavy-duty limit switch. Record nearby accessories and the installed orientation. Check travel direction, actuation force and contact safety logic. The model code XCRA11 should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for XCRA11 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for XCRA11 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
Procurement interpretation
Quote XCRA11 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for XCRA11; the purchasing decision should use the complete written reference and the final application review.
If XCRA11 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from XCRA11 to a different part without checking both product documents.
Visually similar catalogue codes
The 6 codes below resemble the XCR visual pattern and are indexed with representative XCRA11 for search. They can differ in function, electrical limits or approvals; none should be considered automatically interchangeable with XCRA11.
Order conclusion
Specify XCRA11 as printed, confirm the installed application and request supporting manufacturer documentation. For XCRA11, the final site engineer must approve any proposed deviation before the equipment is returned to service.
