VVD0 TeSys Vario switch-disconnector operating context and technical record
The exact code VVD0 should be retained on every service request for this TeSys Vario switch-disconnector. The main image is a shared category reference; it does not establish the precise appearance, options or rating of the ordered VVD0.
Technical data at a glance
| Technical item | Verified value / selection note |
|---|---|
| Full reference | VVD0 |
| Product identity | TeSys Vario switch-disconnector |
| Function | ON/OFF switch-disconnector |
| Rated current | 25 A |
| Mounting | Back of enclosure |
| Poles | Three in regional listing |
Where the item is used
For VVD0, first identify the machine, panel or signalling assembly and the duty performed by this TeSys Vario switch-disconnector. Record nearby accessories and the installed orientation. Check the operating handle, shaft and enclosure design. The model code VVD0 should be compared with the physical nameplate, not reconstructed from a photograph.
What changes the selection
A replacement for VVD0 must fit the electrical supply, output or contact logic, mechanical interface and environmental conditions that apply at the site. Check the manufacturer document for VVD0 and the actual assembly revision. If a proposed alternative differs, require engineering approval before ordering.
What to record after installation
Before removal, capture the original VVD0 terminals, wiring, settings and mounting position. After installation of VVD0, complete the applicable isolation, functional and commissioning checks. Store the delivered label, test result and any approved variation with the asset record.
Procurement interpretation
Quote VVD0 in full, then request the latest technical sheet, quantity, accessory scope, destination and lead time. A distributor may show a generic image for VVD0; the purchasing decision should use the complete written reference and the final application review.
If VVD0 belongs to a legacy range, confirm lifecycle and recommended replacement in the intended country. Do not carry over settings, safety assumptions or connection pinouts from VVD0 to a different part without checking both product documents.
Visually similar catalogue codes
No additional unassigned code with the VVD visual pattern is grouped here. Any alternative to VVD0 still needs its own technical check.
Order conclusion
Specify VVD0 as printed, confirm the installed application and request supporting manufacturer documentation. For VVD0, the final site engineer must approve any proposed deviation before the equipment is returned to service.
