Schneider XBKH70000002M mechanical hour counter technical buyer record
XBKH70000002M is the complete designation to carry through enquiry, purchase and receiving for this mechanical hour counter. The main picture is a shared Schneider-category reference collage rather than an exact image of the XBKH70000002M unit. Use the verified facts and site-specific checks below before approving the order.
Product data confirmed from manufacturer material
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | XBKH70000002M |
| Product identity | mechanical hour counter |
| Display | Seven mechanical digits |
| Supply | 230 V AC |
| Function | Hour counter |
First decision: what task must it perform?
Identify the intended duty of XBKH70000002M in the existing installation and record the equipment tag. Check panel cutout and operating-voltage circuit. A device with a similar-looking code may be a different function or a different interface; start with the actual duty rather than the category picture.
For XBKH70000002M, compare the confirmed product identity with the bill of materials and drawings. Where the table gives only a family or component description, request the current exact-product data sheet before adopting any further voltage, current, environmental or communication claim.
Second decision: what does it connect to?
Document the host equipment, mating part, terminals, mounting dimensions and required accessories for XBKH70000002M. Review supply and signal wiring as applicable. A replacement of XBKH70000002M should be accepted only after a written cross-reference covers all affected interfaces.
The shared image cannot establish a connector, rating, enclosure or revision for XBKH70000002M. Use the actual nameplate and manufacturer drawing. For a software or battery item, check entitlement or host compatibility instead of treating the electrical-device checklist as sufficient.
Third decision: what must the quotation show?
The quotation should reproduce XBKH70000002M exactly, state quantity and destination, and include current manufacturer documentation. Ask whether dependent cables, fuses, mounting parts, licences or service accessories are supplied. If XBKH70000002M is obsolete or regional, obtain a documented availability and alternative plan.
Do not order a near-looking part in place of XBKH70000002M merely because it is available. Compare option suffixes, ratings and approvals; obtain engineering approval where the substitute could change system performance or safety. Record the decision alongside the XBKH70000002M purchase request.
Fourth decision: how will it be accepted?
At receiving, compare the package and installed marking with XBKH70000002M. Photograph the label, inspect condition and account for accessories. Record serial or revision data when present. A mismatch between delivered label and XBKH70000002M requires review before installation.
After installation, retain the relevant test result for XBKH70000002M: operation, trip, signalling, communications, measurement, movement or software activation as appropriate. Keep the final configuration and equipment location in the maintenance file.
Codes that look similar
The 1 codes below resemble the XBK pattern of XBKH70000002M. They are indexed here to make searching easier, not to claim the same function, rating or interchangeability. Verify every complete designation before treating it as an alternative to XBKH70000002M.
Approval record
Approve XBKH70000002M only when its exact identity, installation interface and supplier offer agree. Keep XBKH70000002M on the approved order and receiving record, and document any departure from that designation before it enters service.
