low voltage

Hotline

VW3E1111R070 Schneider Lexium motor power cable: Technical Data, Related Codes and Fit Decision

description:Schneider Electric VW3E1111R070 Lexium motor power cable: key ratings, application and service notes, related references....
BASIC INFO

Schneider VW3E1111R070: Lexium motor power cable procurement record

The VW3E1111R070 designation identifies a Schneider Electric Lexium motor power cable. This field record puts the confirmed VW3E1111R070 facts first, then the checks needed to release an order. The reused main-image collage is a category reference, not a photograph of the exact VW3E1111R070 unit.

Technical data / confirmed identity

Technical itemVerified value / selection note
Complete codeVW3E1111R070
Equipment typeLexium motor power cable
FunctionServo motor power cable
Length7.0 m
ReferenceE-MO-111 SH power cable

01 — Define the existing installation

Record the installed VW3E1111R070 label in full, the equipment tag, and any serial number, firmware or mechanical revision relevant to the assembly. A partial VW3E1111R070 designation does not establish compatibility.

Identify the supply, load, mating part, terminals, environment and available space before specifying VW3E1111R070. Keep a photograph of the original label and the cabinet or machine drawing with the inquiry.

02 — Decide whether the reference fits

Confirm motor and drive connector coding before use.

Compare the VW3E1111R070 parameters above with the actual circuit or machine duty. If the previous item has a different suffix, contact set, rating or enclosure, the proposed VW3E1111R070 must be reviewed as an engineered change.

03 — Install and document the result

Only qualified personnel should fit VW3E1111R070 after site isolation. Preserve settings and software backups where they apply to VW3E1111R070; label wiring before removal and use current manufacturer instructions for the final connection.

Functional testing of VW3E1111R070 should cover the intended switching, signal, drive or protection response and any alarms. Record measured values and the final VW3E1111R070 designation. Safety-related parts require validation of the complete function.

Similar-looking catalog codes

The 31 codes below resemble VW3E1111R070 through their VW3E pattern and are covered on this representative page. They are not separate pages in this publishing set. Similar code shape is not proof that a listed code can replace VW3E1111R070; compare the exact options and ratings.

VW3E1111R100
VW3E1120R020
VW3E1120R030
VW3E1120R040
VW3E1141R040
VW3E1141R050
VW3E1141R070
VW3E1141R080
VW3E1141R200
VW3E1142R010
VW3E1142R020
VW3E1142R030
VW3E1142R035
VW3E1142R040
VW3E1142R050
VW3E1142R060
VW3E1142R080
VW3E1142R100
VW3E1143R050
VW3E1143R200
VW3E1143R250
VW3E1143R500
VW3E1144R200
VW3E1149R050
VW3E2094R050
VW3E2094R250
VW3E3056R003
VW3E3056R030
VW3E6023
VW3E6042
VW3E70400000

Final release check

Before buying VW3E1111R070, confirm its current manufacturer datasheet, actual delivered nameplate, regional availability and any lifecycle notice. Retain the VW3E1111R070 technical review, accessory list and commissioning results for later maintenance.

 

 

Pre:Schneider Electric ATS480D75Y Altistart 480 soft starter | Field Specification and Installation Record Next:BMH0701P06A2A Lexium BMH servo motor by Schneider Electric | Equipment Match and Procurement Review