ATS480D75Y product identity, ratings and installation decision
The ATS480D75Y designation identifies a Schneider Electric Altistart 480 soft starter. This field record puts the confirmed ATS480D75Y facts first, then the checks needed to release an order. The reused main-image collage is a category reference, not a photograph of the exact ATS480D75Y unit.
Technical data / confirmed identity
| Technical item | Verified value / selection note |
|---|---|
| Complete code | ATS480D75Y |
| Equipment type | Altistart 480 soft starter |
| Motor supply | 208–690 V AC |
| Rated current | 75 A |
| Control supply | 110–230 V AC |
01 — Define the existing installation
Record the installed ATS480D75Y label in full, the equipment tag, and any serial number, firmware or mechanical revision relevant to the assembly. A partial ATS480D75Y designation does not establish compatibility.
Identify the supply, load, mating part, terminals, environment and available space before specifying ATS480D75Y. Keep a photograph of the original label and the cabinet or machine drawing with the inquiry.
02 — Decide whether the reference fits
Check motor current, start duty, bypass arrangement and saved settings.
Compare the ATS480D75Y parameters above with the actual circuit or machine duty. If the previous item has a different suffix, contact set, rating or enclosure, the proposed ATS480D75Y must be reviewed as an engineered change.
03 — Install and document the result
Only qualified personnel should fit ATS480D75Y after site isolation. Preserve settings and software backups where they apply to ATS480D75Y; label wiring before removal and use current manufacturer instructions for the final connection.
Functional testing of ATS480D75Y should cover the intended switching, signal, drive or protection response and any alarms. Record measured values and the final ATS480D75Y designation. Safety-related parts require validation of the complete function.
Similar-looking catalog codes
The 1 codes below resemble ATS480D75Y through their ATS480 pattern and are covered on this representative page. They are not separate pages in this publishing set. Similar code shape is not proof that a listed code can replace ATS480D75Y; compare the exact options and ratings.
Final release check
Before buying ATS480D75Y, confirm its current manufacturer datasheet, actual delivered nameplate, regional availability and any lifecycle notice. Retain the ATS480D75Y technical review, accessory list and commissioning results for later maintenance.
