Schneider VPM02D20AA00 PacDrive iSH PS-5 power supply technical buyer record
VPM02D20AA00 is the complete designation to carry through enquiry, purchase and receiving for this PacDrive iSH PS-5 power supply. The main picture is a shared Schneider-category reference collage rather than an exact image of the VPM02D20AA00 unit. Use the verified facts and site-specific checks below before approving the order.
Product data confirmed from manufacturer material
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | VPM02D20AA00 |
| Product identity | PacDrive iSH PS-5 power supply |
| Component | Power-supply module |
| Application | PacDrive iSH |
| Manufacturer cross-reference | Former PS-5 iSH reference 13130265 |
First decision: what task must it perform?
Identify the intended duty of VPM02D20AA00 in the existing installation and record the equipment tag. Check hardware revision, input supply and connected drives. A device with a similar-looking code may be a different function or a different interface; start with the actual duty rather than the category picture.
For VPM02D20AA00, compare the confirmed product identity with the bill of materials and drawings. Where the table gives only a family or component description, request the current exact-product data sheet before adopting any further voltage, current, environmental or communication claim.
Second decision: what does it connect to?
Document the host equipment, mating part, terminals, mounting dimensions and required accessories for VPM02D20AA00. Review supply and signal wiring as applicable. A replacement of VPM02D20AA00 should be accepted only after a written cross-reference covers all affected interfaces.
The shared image cannot establish a connector, rating, enclosure or revision for VPM02D20AA00. Use the actual nameplate and manufacturer drawing. For a software or battery item, check entitlement or host compatibility instead of treating the electrical-device checklist as sufficient.
Third decision: what must the quotation show?
The quotation should reproduce VPM02D20AA00 exactly, state quantity and destination, and include current manufacturer documentation. Ask whether dependent cables, fuses, mounting parts, licences or service accessories are supplied. If VPM02D20AA00 is obsolete or regional, obtain a documented availability and alternative plan.
Do not order a near-looking part in place of VPM02D20AA00 merely because it is available. Compare option suffixes, ratings and approvals; obtain engineering approval where the substitute could change system performance or safety. Record the decision alongside the VPM02D20AA00 purchase request.
Fourth decision: how will it be accepted?
At receiving, compare the package and installed marking with VPM02D20AA00. Photograph the label, inspect condition and account for accessories. Record serial or revision data when present. A mismatch between delivered label and VPM02D20AA00 requires review before installation.
After installation, retain the relevant test result for VPM02D20AA00: operation, trip, signalling, communications, measurement, movement or software activation as appropriate. Keep the final configuration and equipment location in the maintenance file.
Codes that look similar
No unassigned additional VPM02-pattern code is listed under VPM02D20AA00. Another model should still be checked against its own official documentation.
Approval record
Approve VPM02D20AA00 only when its exact identity, installation interface and supplier offer agree. Keep VPM02D20AA00 on the approved order and receiving record, and document any departure from that designation before it enters service.
