Schneider MC-4/11/03/400: field dossier for PacDrive M MC-4 servo amplifier
MC-4/11/03/400 is the exact designation used for this PacDrive M MC-4 servo amplifier entry. The picture is a shared Schneider-category reference collage, not an exact photograph of MC-4/11/03/400. Use the confirmed details below as the starting point for enquiry; the installed label and current manufacturer document govern final selection.
Technical data and identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | MC-4/11/03/400 |
| Product identity | PacDrive M MC-4 servo amplifier |
| Legacy order number | 13130245 |
| Drive current class | 3 A |
| Voltage class | 400 V |
Site information to collect
Before ordering MC-4/11/03/400, write down the existing equipment tag, location and duty. Record the hardware and software revisions and motor pairing before replacement. Capture a legible photograph of the complete MC-4/11/03/400 marking so that voltage, option suffix and revision can be compared with the quotation.
Check the mating equipment around MC-4/11/03/400: supply and load wiring, mechanical mounting, protection, communications or software interface as appropriate. The table intentionally separates documented facts from values that depend on a complete configured variant. Never infer a missing rating from a shared image or from another model whose code merely resembles MC-4/11/03/400.
Quotation worksheet
- Complete MC-4/11/03/400 designation and quantity
- Condition, revision and applicable manufacturer documentation
- Included accessories, exclusions and delivery region
- Any proposed substitution identified separately for approval
For MC-4/11/03/400, ask the supplier to quote the exact reference and disclose any deviation. A suffix, pole count, communications port, certification or terminal style can change the installation even when the front appearance is similar. If the original MC-4/11/03/400 is obsolete, confirm availability and obtain an engineering-reviewed migration path rather than assuming a current series is a direct swap.
Installation and commissioning record
Keep the isolation and safety procedure for the equipment that uses MC-4/11/03/400. Compare delivered markings, package condition and accessories with the approved order. Record hardware and firmware revisions where present; preserve settings and backups before an installed MC-4/11/03/400 is removed.
The acceptance test for MC-4/11/03/400 should match its actual duty: switching or trip performance, protective settings, measured values, motion direction, software connection or busway continuity as applicable. Use qualified personnel and the manufacturer's commissioning instructions. A passing visual inspection alone does not prove that MC-4/11/03/400 is correctly configured.
Similar-looking designations
These 5 codes resemble the visible MC-4 pattern of MC-4/11/03/400. They are indexed here for finding an enquiry, not as equivalent or interchangeable parts. Check each full code against its own rating, function and options before considering it for the same equipment.
Release decision
Approve MC-4/11/03/400 for procurement only after the exact model, documented product role, site connections and supplier offer agree. Keep MC-4/11/03/400 on the purchase and receiving records. If a substitute is proposed, document the differences and obtain approval before fitting it.
