SH31001P02F2000 procurement record for Lexium SH3 servo motor
SH31001P02F2000 is the complete designation for a Schneider Electric Lexium SH3 servo motor. This page gives the verified identity and a practical handover checklist for SH31001P02F2000; the shared category image is illustrative, not a photograph of the exact SH31001P02F2000 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | SH31001P02F2000 |
| Product identity | Lexium SH3 servo motor |
| Frame | 100 mm |
| Shaft | Smooth |
| Encoder | SinCos multiturn |
Receiving inspection
First confirm that the delivered SH31001P02F2000 matches the purchase order and installed equipment tag. Check physical condition, label readability and any accessory codes before SH31001P02F2000 enters stock.
Fit decision
Match the drive, encoder interface, brake option and motor cable. Confirm the exact SH31001P02F2000 nameplate, current manufacturer instructions and the project drawing before acceptance.
Installation and service record
Before fitting SH31001P02F2000, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where SH31001P02F2000 participates in a programmable system. After installation, carry out a controlled functional test appropriate to SH31001P02F2000 and record the result.
For a repeat order of SH31001P02F2000, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for SH31001P02F2000 without a technical review.
Related visual-code register
The following 27 unassigned designations have a similar visible SH3 pattern to SH31001P02F2000, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from SH31001P02F2000; verify each full code independently.
Buyer handover checklist
Specify SH31001P02F2000 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for SH31001P02F2000. Log any deviation from the required SH31001P02F2000 configuration before dispatch and again at commissioning.
