Schneider OSMC32N1C10 Osmart miniature circuit breaker: service and selection card
OSMC32N1C10 is the complete designation for a Schneider Electric Osmart miniature circuit breaker. This page gives the verified identity and a practical handover checklist for OSMC32N1C10; the shared category image is illustrative, not a photograph of the exact OSMC32N1C10 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | OSMC32N1C10 |
| Product identity | Osmart miniature circuit breaker |
| Poles | 1P |
| Curve | C |
| Rated current | 10 A |
Fit decision
Check available fault current and the governing installation standard. Confirm the exact OSMC32N1C10 nameplate, current manufacturer instructions and the project drawing before acceptance.
Receiving inspection
At receipt, compare OSMC32N1C10 on the package with OSMC32N1C10 on the product marking. Inspect terminals, housing and supplied accessories, and photograph the rating label for the maintenance file.
Installation and service record
Before fitting OSMC32N1C10, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where OSMC32N1C10 participates in a programmable system. After installation, carry out a controlled functional test appropriate to OSMC32N1C10 and record the result.
For a repeat order of OSMC32N1C10, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for OSMC32N1C10 without a technical review.
Related visual-code register
The following 25 unassigned designations have a similar visible OSMC pattern to OSMC32N1C10, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from OSMC32N1C10; verify each full code independently.
Buyer handover checklist
Specify OSMC32N1C10 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for OSMC32N1C10. Log any deviation from the required OSMC32N1C10 configuration before dispatch and again at commissioning.
