PKF32W723 ordering record for PratiKa angled wall socket
The full designation PKF32W723 identifies the requested PratiKa angled wall socket. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact PKF32W723 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | PKF32W723 |
| Product identity | PratiKa angled wall socket |
| Rated current | 32 A |
| Contacts | 2P + E |
| Supply | 200 to 250 V AC |
| Mounting | Wall |
Interface review
Start the PKF32W723 review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Check mating plug, clock position and mounting surface. Do not infer the missing interface details from a short code or the category image.
For PKF32W723, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly PKF32W723 and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If PKF32W723 is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of PKF32W723, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing PKF32W723, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting PKF32W723, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned PKF32W723 and the actual supplied designation.
Visually similar catalogue codes
No remaining unassigned PKF32W-pattern designation is grouped with PKF32W723. Similar appearance alone should never replace a technical comparison.
Buyer decision
Approve PKF32W723 only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to PKF32W723; not all of these can be inferred from the designation alone.
Keep the final approved PKF32W723 designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
