Field identification notes for MX/SHT LV429387 ComPact NSX MX shunt-trip release
MX/SHT LV429387 identifies this ComPact NSX MX shunt-trip release enquiry. A shared category collage is used as a reference image, not as an exact photograph of the supplied MX/SHT LV429387 item. Before choosing or replacing MX/SHT LV429387, read the complete physical label and compare it with the system drawings and the relevant manufacturer material.
Technical data confirmed at this stage
| Technical item | Verified value / selection note |
|---|---|
| Complete enquiry wording | MX/SHT LV429387 |
| Documented family or role | ComPact NSX MX shunt-trip release |
| Manufacturer reference | LV429387 |
| Control supply | 220–240 V AC 50/60 Hz in Schneider catalog |
| Breaker compatibility | Confirm NSX frame and terminal arrangement |
| Unverified option details | Confirm complete order record and received unit |
A family name or shared code prefix does not establish identical ratings, fit or interchangeability.
The table records the evidence available for MX/SHT LV429387. An absent value is deliberately left open. For MX/SHT LV429387, the complete configuration may determine the coil, firmware, process interface, mounting arrangement or protection rating; use the installed MX/SHT LV429387 label and full datasheet before approving a purchase.
What to send with a purchase enquiry
- Full nameplate photograph and exact designation
- Equipment drawing, location and installed revision
- Required accessories, connectors, cables and condition
- Acceptance test and delivery requirements
Put MX/SHT LV429387 on a separate quotation line and ask the seller to restate the full code. If a different version is proposed for MX/SHT LV429387, request a written matrix comparing ratings, electrical connections, mechanical fit and software or firmware requirements. The buyer should not accept the substitution merely because it belongs to the same family.
Equipment interface review
Review the immediate neighbours of MX/SHT LV429387 in the installation. For a breaker or contactor, check pole arrangement, control supply and auxiliary contacts. For a controller or I/O accessory, check rack, baseplate, network and terminal assignment. For a motor or sensor, check feedback, power, cable and mounting. Apply only the categories relevant to the actual MX/SHT LV429387 item.
Compare MX/SHT LV429387 against the archived wiring and service record. Record any changes in version, communications, calibration or safety approval. A replacement order for MX/SHT LV429387 should identify who will verify those changes and what evidence is required at receiving and commissioning.
Receiving and acceptance
On receipt, inspect the packaging and the actual MX/SHT LV429387 marking before installation. Keep serial and revision information in the equipment file. Use the site's electrical and process isolation procedure, then test the specific switching, protection, control, measurement or motion function appropriate to MX/SHT LV429387. Record the result rather than relying on a visual match alone.
If MX/SHT LV429387 is a legacy item, separately check lifecycle status, condition, warranty and availability of support. If MX/SHT LV429387 is offered as refurbished stock, require inspection and test records. If a newer item is offered instead, keep its new designation distinct from MX/SHT LV429387 in the approval chain.
Related-looking designations
No further unassigned MX/SHT-pattern code is indexed with MX/SHT LV429387; any alternative still needs manufacturer and site verification.
Release check
Release MX/SHT LV429387 only after the complete identification, applicable technical requirements, offer and receiving plan agree. Keep MX/SHT LV429387 visible in the final procurement record and document every approved deviation.
