Evaluating M620BA0A00 M6200 power-meter base module for a purchase
M620BA0A00 is the complete designation to carry through enquiry, purchase and receiving for this M6200 power-meter base module. The main picture is a shared Schneider-category reference collage rather than an exact image of the M620BA0A00 unit. Use the verified facts and site-specific checks below before approving the order.
Product data confirmed from manufacturer material
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | M620BA0A00 |
| Product identity | M6200 power-meter base module |
| Component | Base module |
| Meter family | M6200 |
| Role | Power metering assembly |
First decision: what task must it perform?
Identify the intended duty of M620BA0A00 in the existing installation and record the equipment tag. Confirm display, CT/PT and communications options. A device with a similar-looking code may be a different function or a different interface; start with the actual duty rather than the category picture.
For M620BA0A00, compare the confirmed product identity with the bill of materials and drawings. Where the table gives only a family or component description, request the current exact-product data sheet before adopting any further voltage, current, environmental or communication claim.
Second decision: what does it connect to?
Document the host equipment, mating part, terminals, mounting dimensions and required accessories for M620BA0A00. Review supply and signal wiring as applicable. A replacement of M620BA0A00 should be accepted only after a written cross-reference covers all affected interfaces.
The shared image cannot establish a connector, rating, enclosure or revision for M620BA0A00. Use the actual nameplate and manufacturer drawing. For a software or battery item, check entitlement or host compatibility instead of treating the electrical-device checklist as sufficient.
Third decision: what must the quotation show?
The quotation should reproduce M620BA0A00 exactly, state quantity and destination, and include current manufacturer documentation. Ask whether dependent cables, fuses, mounting parts, licences or service accessories are supplied. If M620BA0A00 is obsolete or regional, obtain a documented availability and alternative plan.
Do not order a near-looking part in place of M620BA0A00 merely because it is available. Compare option suffixes, ratings and approvals; obtain engineering approval where the substitute could change system performance or safety. Record the decision alongside the M620BA0A00 purchase request.
Fourth decision: how will it be accepted?
At receiving, compare the package and installed marking with M620BA0A00. Photograph the label, inspect condition and account for accessories. Record serial or revision data when present. A mismatch between delivered label and M620BA0A00 requires review before installation.
After installation, retain the relevant test result for M620BA0A00: operation, trip, signalling, communications, measurement, movement or software activation as appropriate. Keep the final configuration and equipment location in the maintenance file.
Codes that look similar
No unassigned additional M620-pattern code is listed under M620BA0A00. Another model should still be checked against its own official documentation.
Approval record
Approve M620BA0A00 only when its exact identity, installation interface and supplier offer agree. Keep M620BA0A00 on the approved order and receiving record, and document any departure from that designation before it enters service.
