Schneider ELNME4C40AAA MX eco variable-speed drive technical buyer record
ELNME4C40AAA is the complete designation to carry through enquiry, purchase and receiving for this MX eco variable-speed drive. The main picture is a shared Schneider-category reference collage rather than an exact image of the ELNME4C40AAA unit. Use the verified facts and site-specific checks below before approving the order.
Product data confirmed from manufacturer material
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ELNME4C40AAA |
| Product identity | MX eco variable-speed drive |
| Motor power | 400 kW |
| System | 400 V, three-phase |
| Enclosure | IP00 listing |
| EMC | Manufacturer listing includes EMC |
First decision: what task must it perform?
Identify the intended duty of ELNME4C40AAA in the existing installation and record the equipment tag. Check motor duty, cabinet cooling and line conditions. A device with a similar-looking code may be a different function or a different interface; start with the actual duty rather than the category picture.
For ELNME4C40AAA, compare the confirmed product identity with the bill of materials and drawings. Where the table gives only a family or component description, request the current exact-product data sheet before adopting any further voltage, current, environmental or communication claim.
Second decision: what does it connect to?
Document the host equipment, mating part, terminals, mounting dimensions and required accessories for ELNME4C40AAA. Review supply and signal wiring as applicable. A replacement of ELNME4C40AAA should be accepted only after a written cross-reference covers all affected interfaces.
The shared image cannot establish a connector, rating, enclosure or revision for ELNME4C40AAA. Use the actual nameplate and manufacturer drawing. For a software or battery item, check entitlement or host compatibility instead of treating the electrical-device checklist as sufficient.
Third decision: what must the quotation show?
The quotation should reproduce ELNME4C40AAA exactly, state quantity and destination, and include current manufacturer documentation. Ask whether dependent cables, fuses, mounting parts, licences or service accessories are supplied. If ELNME4C40AAA is obsolete or regional, obtain a documented availability and alternative plan.
Do not order a near-looking part in place of ELNME4C40AAA merely because it is available. Compare option suffixes, ratings and approvals; obtain engineering approval where the substitute could change system performance or safety. Record the decision alongside the ELNME4C40AAA purchase request.
Fourth decision: how will it be accepted?
At receiving, compare the package and installed marking with ELNME4C40AAA. Photograph the label, inspect condition and account for accessories. Record serial or revision data when present. A mismatch between delivered label and ELNME4C40AAA requires review before installation.
After installation, retain the relevant test result for ELNME4C40AAA: operation, trip, signalling, communications, measurement, movement or software activation as appropriate. Keep the final configuration and equipment location in the maintenance file.
Codes that look similar
No unassigned additional ELNME-pattern code is listed under ELNME4C40AAA. Another model should still be checked against its own official documentation.
Approval record
Approve ELNME4C40AAA only when its exact identity, installation interface and supplier offer agree. Keep ELNME4C40AAA on the approved order and receiving record, and document any departure from that designation before it enters service.
