Technical selection notes for LX1FG220 TeSys F contactor replacement coil
LX1FG220 is the complete designation for a Schneider Electric TeSys F contactor replacement coil. This page gives the verified identity and a practical handover checklist for LX1FG220; the shared category image is illustrative, not a photograph of the exact LX1FG220 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LX1FG220 |
| Product identity | TeSys F contactor replacement coil |
| Supply at 50 Hz | 220–230 V AC |
| Supply at 60 Hz | 265–277 V AC |
| Lifecycle | Discontinued; check service availability |
Fit decision
Verify contactor magnet version and operating frequency. Confirm the exact LX1FG220 nameplate, current manufacturer instructions and the project drawing before acceptance.
Receiving inspection
At receipt, compare LX1FG220 on the package with LX1FG220 on the product marking. Inspect terminals, housing and supplied accessories, and photograph the rating label for the maintenance file.
Installation and service record
Before fitting LX1FG220, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where LX1FG220 participates in a programmable system. After installation, carry out a controlled functional test appropriate to LX1FG220 and record the result.
For a repeat order of LX1FG220, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for LX1FG220 without a technical review.
Related visual-code register
The following 4 unassigned designations have a similar visible LX1F pattern to LX1FG220, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from LX1FG220; verify each full code independently.
Buyer handover checklist
Specify LX1FG220 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for LX1FG220. Log any deviation from the required LX1FG220 configuration before dispatch and again at commissioning.
