Schneider Electric AK5PC13 installation-fit guide
AK5PC13 is the complete designation for a Schneider Electric Linergy HK plug outlet. This page gives the verified identity and a practical handover checklist for AK5PC13; the shared category image is illustrative, not a photograph of the exact AK5PC13 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | AK5PC13 |
| Product identity | Linergy HK plug outlet |
| Poles | 3P |
| Thermal current | 16 A |
| Connection | Two points, 2.5 mm² cables |
Receiving inspection
First confirm that the delivered AK5PC13 matches the purchase order and installed equipment tag. Check physical condition, label readability and any accessory codes before AK5PC13 enters stock.
Fit decision
Match the Linergy assembly and connection layout. Confirm the exact AK5PC13 nameplate, current manufacturer instructions and the project drawing before acceptance.
Installation and service record
Before fitting AK5PC13, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where AK5PC13 participates in a programmable system. After installation, carry out a controlled functional test appropriate to AK5PC13 and record the result.
For a repeat order of AK5PC13, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for AK5PC13 without a technical review.
Related visual-code register
The following 3 unassigned designations have a similar visible AK5P pattern to AK5PC13, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from AK5PC13; verify each full code independently.
Buyer handover checklist
Specify AK5PC13 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for AK5PC13. Log any deviation from the required AK5PC13 configuration before dispatch and again at commissioning.
Additional AK5 visually similar references
The following printed designations are indexed together because their first three characters look alike. They may identify different series, functions, ratings or accessories. This is a search index only, not a claim of interchangeability or a specification for every listed code. Confirm each full manufacturer designation before ordering or installation.
- AK5JB145
- AK5JB146
