LVS01215 procurement record for PrismaSeT cable-entry grommet set
LVS01215 is the complete designation for a Schneider Electric PrismaSeT cable-entry grommet set. This page gives the verified identity and a practical handover checklist for LVS01215; the shared category image is illustrative, not a photograph of the exact LVS01215 item.
Technical data to check
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LVS01215 |
| Product identity | PrismaSeT cable-entry grommet set |
| Contents | Five rectangular grommets |
| Opening | 70 × 40 mm |
| Use | PrismaSeT enclosure cable entry |
Application checkpoint
Check panel cut-out and sealing arrangement. Confirm the exact LVS01215 nameplate, current manufacturer instructions and the project drawing before acceptance.
A similar-looking code is not evidence that it will replace LVS01215. Compare electrical duty, mounting, connection and control behavior before approving LVS01215 for installation.
Installation and service record
Before fitting LVS01215, isolate the relevant circuit and identify every conductor or busbar connection. Preserve settings or program data where LVS01215 participates in a programmable system. After installation, carry out a controlled functional test appropriate to LVS01215 and record the result.
For a repeat order of LVS01215, keep the complete suffix, source document revision, equipment tag, accessories and any measured site limits together. This prevents a visually similar variant from being substituted for LVS01215 without a technical review.
Related visual-code register
The following 5 unassigned designations have a similar visible LVS0 pattern to LVS01215, so they are indexed on this representative page instead of receiving separate product pages. Their ratings and functions may differ from LVS01215; verify each full code independently.
Buyer handover checklist
Specify LVS01215 in full on the enquiry, not an abbreviated family name. Ask the supplier to confirm the marking and provide the appropriate Schneider Electric documentation for LVS01215. Log any deviation from the required LVS01215 configuration before dispatch and again at commissioning.
