Schneider LG1K065M710: installation interface for TeSys LG enclosed direct-on-line starter
The full designation LG1K065M710 identifies the requested TeSys LG enclosed direct-on-line starter. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact LG1K065M710 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LG1K065M710 |
| Product identity | TeSys LG enclosed direct-on-line starter |
| Motor current range | 4 to 6.3 A |
| Coil supply | 220 to 230 V AC |
| Starter | Enclosed DOL |
Interface review
Start the LG1K065M710 review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Confirm motor duty and enclosure installation. Do not infer the missing interface details from a short code or the category image.
For LG1K065M710, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly LG1K065M710 and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If LG1K065M710 is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of LG1K065M710, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing LG1K065M710, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting LG1K065M710, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned LG1K065M710 and the actual supplied designation.
Visually similar catalogue codes
No remaining unassigned LG1-pattern designation is grouped with LG1K065M710. Similar appearance alone should never replace a technical comparison.
Buyer decision
Approve LG1K065M710 only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to LG1K065M710; not all of these can be inferred from the designation alone.
Keep the final approved LG1K065M710 designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
