LB1LB03P08 ordering record for LB1 motor protection module
The full designation LB1LB03P08 identifies the requested LB1 motor protection module. This record separates confirmed catalogue information from project-specific checks. The shared Schneider category image is a reference collage, not a photograph of the exact LB1LB03P08 variant.
Technical parameters and identity
| Technical item | Verified value / selection note |
|---|---|
| Complete model | LB1LB03P08 |
| Product identity | LB1 motor protection module |
| Setting range | 2.5 to 4 A |
| Poles | 3 |
| Protection | Three-pole motor protection module |
Interface review
Start the LB1LB03P08 review at the interface it connects to: the host assembly, electrical supply, mating device or mechanical opening. Verify host starter and motor nameplate current. Do not infer the missing interface details from a short code or the category image.
For LB1LB03P08, record the existing installed marking and the intended location. Compare the full manufacturer's designation, mounting method, terminals, ratings and applicable standards. A visually similar code may differ in an option that changes the installation decision.
Documentation requested with a quotation
Ask the supplier to quote exactly LB1LB03P08 and provide the current manufacturer data sheet, installation instructions and any relevant dimensional drawing. State the destination country and quantity. If LB1LB03P08 is discontinued or regional, ask for availability and a documented alternative rather than assuming stock.
For a proposed replacement of LB1LB03P08, require a written cross-reference. Compare every affected rating and interface with the original engineering requirement before substituting. The presence of another number in the same visual family is not evidence of equivalence.
Installation and commissioning record
Before installing LB1LB03P08, check the delivered label, package condition and included accessories against the approved order. Keep a photo of the marking, the wiring or assembly diagram, and the equipment tag. Follow the product instructions for safe isolation and torque or mounting requirements.
After fitting LB1LB03P08, document the relevant functional test: operation, indication, protective coordination, communication or mechanical movement as applicable. Record any difference between the planned LB1LB03P08 and the actual supplied designation.
Visually similar catalogue codes
The following 1 designations share a close-looking LB1 pattern with LB1LB03P08. They are indexed here to help search; this list does not assert a shared function, rating or interchangeability. Check each exact code separately.
Buyer decision
Approve LB1LB03P08 only after the confirmed parameters above and the project-specific interface checks are reconciled. In particular, identify the supply, protection, mounting and mating accessories that apply to LB1LB03P08; not all of these can be inferred from the designation alone.
Keep the final approved LB1LB03P08 designation on the procurement and receiving documents. If an alternative arrives, quarantine the change for engineering review before it is installed or energized.
