IDP10-T22A26D-M2L1 Foxboro IDP10 differential-pressure transmitter — configuration and acceptance record
IDP10-T22A26D-M2L1 is the exact designation used for this Foxboro IDP10 differential-pressure transmitter entry. The picture is a shared Schneider-category reference collage, not an exact photograph of IDP10-T22A26D-M2L1. Use the confirmed details below as the starting point for enquiry; the installed label and current manufacturer document govern final selection.
Technical data and identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | IDP10-T22A26D-M2L1 |
| Product identity | Foxboro IDP10 differential-pressure transmitter |
| Measurement | Differential pressure |
| Family output | 4 to 20 mA with HART |
| Configured range/materials | Verify the exact full suffix and nameplate |
Site information to collect
Before ordering IDP10-T22A26D-M2L1, write down the existing equipment tag, location and duty. Confirm calibrated span, process connections, wetted materials and approval markings. Capture a legible photograph of the complete IDP10-T22A26D-M2L1 marking so that voltage, option suffix and revision can be compared with the quotation.
Check the mating equipment around IDP10-T22A26D-M2L1: supply and load wiring, mechanical mounting, protection, communications or software interface as appropriate. The table intentionally separates documented facts from values that depend on a complete configured variant. Never infer a missing rating from a shared image or from another model whose code merely resembles IDP10-T22A26D-M2L1.
Quotation worksheet
- Complete IDP10-T22A26D-M2L1 designation and quantity
- Condition, revision and applicable manufacturer documentation
- Included accessories, exclusions and delivery region
- Any proposed substitution identified separately for approval
For IDP10-T22A26D-M2L1, ask the supplier to quote the exact reference and disclose any deviation. A suffix, pole count, communications port, certification or terminal style can change the installation even when the front appearance is similar. If the original IDP10-T22A26D-M2L1 is obsolete, confirm availability and obtain an engineering-reviewed migration path rather than assuming a current series is a direct swap.
Installation and commissioning record
Keep the isolation and safety procedure for the equipment that uses IDP10-T22A26D-M2L1. Compare delivered markings, package condition and accessories with the approved order. Record hardware and firmware revisions where present; preserve settings and backups before an installed IDP10-T22A26D-M2L1 is removed.
The acceptance test for IDP10-T22A26D-M2L1 should match its actual duty: switching or trip performance, protective settings, measured values, motion direction, software connection or busway continuity as applicable. Use qualified personnel and the manufacturer's commissioning instructions. A passing visual inspection alone does not prove that IDP10-T22A26D-M2L1 is correctly configured.
Similar-looking designations
These 3 codes resemble the visible IDP10 pattern of IDP10-T22A26D-M2L1. They are indexed here for finding an enquiry, not as equivalent or interchangeable parts. Check each full code against its own rating, function and options before considering it for the same equipment.
Release decision
Approve IDP10-T22A26D-M2L1 for procurement only after the exact model, documented product role, site connections and supplier offer agree. Keep IDP10-T22A26D-M2L1 on the purchase and receiving records. If a substitute is proposed, document the differences and obtain approval before fitting it.
