How GV4P25B should be checked before ordering and commissioning
GV4P25B identifies a Schneider Electric TeSys GV4 motor circuit breaker. This service note separates confirmed GV4P25B catalog facts from site-dependent checks. The main collage is a shared category reference image, not a claim that it depicts the exact GV4P25B unit.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete reference | GV4P25B |
| Product family | TeSys GV4 motor circuit breaker |
| Poles / current | 3 poles, 25 A |
| Breaking capacity | 25 kA class |
| Connection | EverLink terminals |
Fit decision
For GV4P25B, the immediate fit decision is: Check motor-protection setting and available fault current. A visually related designation may have different ratings. Keep the exact GV4P25B reference and engineering approval together.
Four-step field sequence
- 1. Identify Photograph the complete GV4P25B nameplate and installed assembly. Capture the equipment tag and verify that GV4P25B is the intended ordering reference.
- 2. Compare Match GV4P25B electrical or signal ratings, mounting, terminal positions and associated devices with the approved drawing. Check motor-protection setting and available fault current.
- 3. Prepare For GV4P25B, isolate the relevant circuit, label wiring and save settings or network configuration when the product carries them.
- 4. Test Commission GV4P25B under the site's safe procedure. Record operation, indication, alarms and any configuration or protection settings.
Ordering record
Ask for current regional availability and the manufacturer's document for GV4P25B. Record any replacement proposal as a separate comparison, not as an automatic substitute for GV4P25B.
When GV4P25B is installed in an older system, preserve the as-found wiring, firmware, drive parameters or controller program as applicable. A modern substitute for GV4P25B may require changes to mechanical fit, signaling or commissioning; test those changes at system level.
Related visual-code references
The 6 references below resemble GV4P25B under the visible GV4P code pattern. They are collected here rather than published on separate product pages. They are not declared interchangeable with GV4P25B; review each full designation and operating limits.
Handover and acceptance
Record the delivered GV4P25B label, approved settings, wiring checks and functional result. Keep the GV4P25B decision with the site's service history. This makes future maintenance traceable without assuming that a visually similar part is the same product.
