GV3ME10 installation sequence and technical identity
GV3ME10 identifies a Schneider Electric TeSys GV3-ME motor circuit breaker. This service note separates confirmed GV3ME10 catalog facts from site-dependent checks. The main collage is a shared category reference image, not a claim that it depicts the exact GV3ME10 unit.
Key technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete reference | GV3ME10 |
| Product family | TeSys GV3-ME motor circuit breaker |
| Trip setting | 4–6 A class |
| Technology | Thermal-magnetic |
| Connection | Screw-clamp terminals |
Ordering record
Specify GV3ME10 with its complete code, quantity, intended cabinet or machine tag and related accessories. The GV3ME10 title alone cannot establish whether a mating base, contact block or terminal kit is supplied.
Four-step field sequence
- 1. Identify Photograph the complete GV3ME10 nameplate and installed assembly. Capture the equipment tag and verify that GV3ME10 is the intended ordering reference.
- 2. Compare Match GV3ME10 electrical or signal ratings, mounting, terminal positions and associated devices with the approved drawing. Check actual motor nameplate current and starter coordination.
- 3. Prepare For GV3ME10, isolate the relevant circuit, label wiring and save settings or network configuration when the product carries them.
- 4. Test Commission GV3ME10 under the site's safe procedure. Record operation, indication, alarms and any configuration or protection settings.
When GV3ME10 is installed in an older system, preserve the as-found wiring, firmware, drive parameters or controller program as applicable. A modern substitute for GV3ME10 may require changes to mechanical fit, signaling or commissioning; test those changes at system level.
Related visual-code references
The 5 references below resemble GV3ME10 under the visible GV3ME code pattern. They are collected here rather than published on separate product pages. They are not declared interchangeable with GV3ME10; review each full designation and operating limits.
Handover and acceptance
Record the delivered GV3ME10 label, approved settings, wiring checks and functional result. Keep the GV3ME10 decision with the site's service history. This makes future maintenance traceable without assuming that a visually similar part is the same product.
