DF102V fuse-holder selection: two poles, link size and protection coordination
Schneider Electric DF102V is a two-pole TeSys DF fuse carrier for 10×38 mm fuse links. The carrier rating does not define the protective behavior of the installed links; fuse type and rating must be selected for the circuit. The shared distribution collage is a category reference image, not an exact DF102V photograph.
Technical specification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Exact reference | DF102V |
| Range | TeSys DF fuse carrier |
| Poles | 2 |
| Carrier rating | 32 A, 690 V AC class |
| Fuse-link size | 10 × 38 mm |
| Indication | Blown-fuse indicator |
| Important | Fuse links and installation protection must be selected separately |
Fuse link choice
Check the circuit current, voltage, prospective fault current and required fuse characteristic before fitting links into DF102V. A 32 A carrier can hold lower-rated links where the design requires them. Do not assume the carrier itself is a complete protective device without correctly specified links.
Mechanical and wiring review
Confirm the two-pole arrangement, conductor termination, DIN-rail space and access for safe fuse replacement. Compare indicator wiring and labeling with the existing panel. A similar DF code may use another pole count or link size even when the housing appears related.
Maintenance check
Isolate the circuit according to site rules before opening DF102V. Investigate the cause of a blown fuse, replace it with the specified type and verify both poles and the indicator. Record the fuse-link reference separately from the carrier reference.
Similar-looking Schneider references
The following codes resemble DF102V in naming or appearance. Ratings, functions and connection details can differ; they are comparison references, not guaranteed substitutes for DF102V.
DF141V, DF2CA02, DF2CN02, DF2FGN10, DF2BN0100, DF2HA1201, DF4331000, DF2-HA1201, DF223C, DF143NC
Before placing an order
Specify DF102V with the 10×38 mm fuse size, two-pole requirement and indicator function. Confirm the intended fuse-link code and installation ratings separately from DF102V.
For DF102V, confirm the printed designation, current Schneider Electric documentation, installation conditions and any lifecycle notice before purchase or commissioning.
